An apartment lift in Ranchi is used dozens of times a day by children, elders, delivery staff and movers. Get the choice right at design stage and residents hardly think about it. Get it wrong and the society lives with queues, breakdowns and high bills for years. This guide is for builders, architects and resident welfare associations planning a lift for a residential block in Ranchi.
Eldeal Engineers supplies, installs and maintains passenger lifts for apartment buildings. Ranchi projects are served by our Patna branch team. We have no office in Jharkhand, so we plan surveys, installation stages and service visits from Patna and agree them with you in writing.
Sizing an apartment lift in Ranchi
Ranchi's new residential towers range from compact four-floor blocks on narrow plots to multi-tower projects of ten floors or more. Three numbers decide the lift:
- Floors served. More floors mean longer round trips and more waiting at peak hours.
- Flats per floor and people per flat. This sets the morning rush when people leave for office, school and college.
- Special loads. Furniture, water cans, gas cylinders and, most importantly, a stretcher in an emergency.
| Building | Typical lift plan | Note |
|---|---|---|
| 4–5 floors, 8–16 flats | One 6–8 person lift | Plan a stretcher-depth car if space allows |
| 6–10 floors, 20–40 flats | One or two 8–10 person lifts | Two lifts give cover during service |
| 10+ floors, 40+ flats per tower | Two or more lifts with group control | One stretcher car; check fire-lift rules for the height |
These are starting points, not rules. We size the lift from your drawings and occupancy at the free survey. Our passenger elevators page lists capacities and speeds.
MRL or machine room?
Many Ranchi builders now prefer machine-room-less (MRL) lifts because they free up roof space and simplify the top floor. Machine-room lifts are still a good choice for taller buildings and heavier use, and they give easy access for service. Our guide to MRL vs machine-room elevators sets out the trade-offs. Whichever you choose, decide early, because the shaft, pit and headroom depend on it.
What the builder must provide
- A plumb shaft of the right size, with a pit of the required depth and enough headroom at the top floor.
- Landing openings with lintels at each floor.
- A dedicated power supply with proper earthing, and a lighting supply in the shaft.
- Ventilation for the machine room or controller space.
- Access for unloading and storing lift equipment during installation.
We give you a drawing with these details before civil work starts, which saves expensive changes later.
Power backup and storms
Ranchi's monsoon storms often bring power cuts. Every lift we supply has an ARD (automatic rescue device) that brings the car to the nearest floor and opens the doors when mains power fails. For a society, the real question is whether the lift should keep running on the generator. In most blocks above five floors, the answer is yes. We work with your electrical consultant so the DG set is sized for the lift's starting load, and we advise on surge protection for the controller.
Features residents notice
- Smooth ride and accurate levelling from the V3F (VVVF) drive, which also lowers the electricity bill.
- Light-curtain door protection, so doors reopen for children and elders.
- Overload sensor with voice prompt, useful on moving days.
- Intercom, alarm and emergency light inside the car.
- Durable car finish, such as stainless steel, that stands up to daily knocks.
After handover: society AMC
Once the builder hands over, the society or RWA becomes responsible for the lift. The biggest ongoing cost is maintenance. A comprehensive AMC covers most parts and makes the yearly budget predictable. A non-comprehensive AMC costs less but parts are billed separately. Read our comparison of comprehensive vs non-comprehensive AMC before choosing. We also suggest societies keep a simple logbook of breakdowns and service visits; it helps with any registration or inspection the local authority may require.
What drives the cost of an apartment lift
We do not publish a price per lift for Ranchi because two towers of the same height can need very different equipment. The main cost drivers are the number of stops, the car capacity, MRL or machine-room design, automatic door type, car finish, group control for two or more lifts and the speed needed for taller towers. Civil work for the shaft and pit is usually in the builder's scope and is not part of our price, which we show clearly in the quote. For a sense of overall ranges and trade-offs, our article on lift prices in India is a useful starting point.
Adding a lift to an older apartment in Ranchi
Ranchi has many older residential blocks of four or five floors that were built without a lift. As residents age, societies ask whether one can be added. Often it can: in the stairwell void, in a new internal shaft, or in a structural shaft on an outside wall with access from the stair landings. The main checks are space, structure, a pit foundation, power supply and agreement among owners. We give the society a drawing, an itemised quote and a yearly running-cost estimate, so members can decide together how to share the cost.
Rules for apartment lifts in Jharkhand
New lifts must meet IS 17900, mandatory for new installations from 22 December 2025, with protections such as UCMP, ACOP and ARD. The National Building Code 2016, Part 8 Section 5, sets building-side requirements, including fire lifts in taller buildings. Registration and inspection procedures are set by the state and local authorities, so confirm current requirements with them before you finalise plans.
Plan your apartment lift with us
For a broader view of what we do in the city, see our lift company in Ranchi page. To start, send us your drawings or book a free site survey. Call or WhatsApp +91 84489 44342 or +91 62077 91650, or email info@eldealengineers.com. Our Patna branch team will come back with a lift plan and an itemised quote.